 |
|
Dan Lanteigne (St.Catharines) "Instruction was very clear and easy to follow , very comfortable pace and very informative. I've worked on towmotors and reach trucks for 21 years and still learned some valuable information."
|
|
|
 |
 |
Welcome to TST's Frequently Asked Question Archives. The following is a list of previously answered questions. To view the current FAQ click here.
|
|
Q. We are considering doing some minor modifications to our platform on our scissor lift. Do we have to have it checked even if it's done by a certified welder?
|
|
A. Section 4.24 of the CSA Standards (B354.2-01) States:
Modifications, alterations, or remanufacture of an aerial platform shall be made only with written permission of the manufacturer.
Where it is not possible to obtain written permission from the manufacture, modifications to an aerial platform shall be made in accordance with the instructions from a professional engineer with expertise in aerial platforms. The modified aerial platform shall be tested in accordance with all stability test requirements of Clause 4.6 and certified by the professional engineer as having passed these stability tests.
|
|
|
» back to archives
|
|
» back to our FAQ home!
Should you have a question and answer pertaining to safety that you would like to see posted on our site, visit our contact page and send us an email and we will review your request. Thank you, and don't forget to come back for free valuable information !!!
|
|
